Filters
Close

Copeland Emerson Programmable Touchscreen Thermostat w/ Guide

SKU: 810-1600

Download Installation/Operation Manual

 

The Copeland Emerson Programmable Touchscreen Thermostat (P/N 810-1600) is a configurable device intended for light commercial applications. The thermostat is a communicating, intelligent sensor and controller combination with built-in temperature and humidity sensors used to control systems such as conventional Rooftop Units (RTU) and Heat Pumps (HP). The thermostat communicates over a Modbus RTU network that easily integrates with a building management system (BMS).

Technical Specifications:

  • Power Requirements: 18VAC to 30VAC, 50-60Hz, less than 3.6 VA at 24VAC nominal, Class 2
  • Wire Size: 18AWG maximum, 22AWG recommended
  • Relay Contact Rating: Max 1.0A per Relay, Max Total 2.0A (R, Rc and C terminal)
  • Binary Input: Fan Proof switch input (floating or GND)
  • Analog Input: Designed for 10K Ω NTC thermistor
  • Serial Data Link: Modbus RTU on RS-485, 9600 or 19200 bps (default)
  • Relay Output: 2C, 2H, Fan, ECO, AUX, O/B
  • Temperature Sensor Type: Local integrated temperature sensor, digital output (I2C)
  • Supported Configurations: Conventional systems, Heat-pump systems
  • Temperature Setting Range: 32°F to 122°F (0°C to 50°C)
  • Temperature Accuracy: +/- 0.6°C, +/- 1.1°F, within operating temperature range
  • Minimum Temperature Deadband: Default value is 4°F / 2°C, between cooling and heating
  • Operating Temperature: 32°F to 122°F (0°C to 50°C)
  • Storage Temperature: -4°F to 140°F (-20°C to 60°C)
  • Humidity Accuracy: +/- 5% @ 50% RH @ 77°F (25°C)
  • Humidity Display Range: 0% to 95%
  • RTC Battery: CR1220
  • Compliance (USA): Designed to comply to UL60730, FCC CFR 47 Part 15 Subpart B Class B
  • Compliance (Canada): Designed to comply to E60730, Industry Canada ICES-003 Issue 6
  • Dimensions: H 4.72” x W 5.47” x T 1.32”
  • Software: V107
  • Part Number: 810-1600