Filters
Close

Copeland Emerson Refrigerant Leak Detector (RLDS) 16 Zone w/HHT & Gateway

Please call for availability.

SKU: 808-2017

Download Cut Sheet

Download Installation and Operation User Manual

Emerson’s RLDS delivers the best refrigerant monitoring available, with industry-leading MDL (minimum detectable level) of 1 ppm for halogenated gases, the fastest sampling frequency and the widest range of refrigerants accurately detected. The large graphic LCD display and LED status indicators provide a system-wide overview at a glance.

The RLDS enhances effective refrigerant management, detecting leaks early to enable cost savings by reducing refrigerant discharge, enhancing energy effi ciency and reducing risk of refrigeration failure and product loss. A variety of communication interfaces are available, including Modbus, BACnet and LonWorks, allowing easy integration into BMS systems and remote monitoring solutions.

Product Details:

  • RLDS 16 Zone
  • 17 line-end filters
  • Charcoal filter
  • T-bolt bracket
  • 120/240 VAC 50/60 Hz
  • HHT and Gateway

Specifications:

  • Coverage: Zones: 4,8,12 and 16 zone systems available
  • Sensor: Proprietary non-dispersive infrared (NDIR) technology
  • Dimensions: 12.23”H x 13.7” x 4.96 (21.0642 cm x 34.7980 cm x 12.5984 cm)
  • Weight: 15 lbs (6.8 kg)
  • Communications: Full two-way communication with BMS via RS-485 serial interface. RS-232C communication port standard.
  • Alarms: Four SPDT alarm contacts are provided rated 2A at 250 VAC (inductive), 5A at 250 VAC (resistive). Three assigned to ppm level alarms, one assigned to system faults.
  • Conditioned Signal: Optional dual 4-20mA DC isolated outputs. Channel 1 = zone area, Channel 2 = ppm
  • System Noise: Less than 40dB(A) @ 10 feet (3 meters)
  • Response Time: 5 to 315 seconds – depending on air line length and number of zones
  • Sampling Mode: Automatic or manual (hold)
  • Monitoring Distance: 1200 ft max (500 ft for NH3) for combined length of sample and exhaust tubing (each zone)
  • Power Safety Mode: Fully automatic system reset. All programmed parameters retained.
  • Operating Temperature: 32OF to 122OF (0OC to 50OC)
  • Ambient Humidity: 5% to 90% RH non-condensing
  • Altitude Limit: 6,562 ft (2,000 m)
  • Power: 100 to 240 VAC, 50/60 Hz, 20W
  • Approvals: UL 61010-14, CAN/CA 22.2 No. 61010-1; EN61010-1, EN61326; EN14624; CE Mark

Part Number: 808-2017

Categories