Download Installation Instructions
Compatible Copeland Emerson Multi-Zone Leak Detector Panel Part # 851-4074 or 851-4550.
IR-CO2 are transmitters for measuring concentration of carbon dioxide. The sensors use Non-Dispersive Infrared technology (NDIR) with Automatic Baseline Correction (ABC), which gives long life and good selectivity.
The transmitters give a linear output signal (4 to20mA or 0 to 10V) proportional to the gas concentration.
Technical Data:
- Range/Gas: 0-10000ppm Carbon Dioxide
- Sensor Type: CO2
- Housing: PC polycarbonate (IP67)
- Power Supply: 12 to 30Vdc
- Power Consumption: 2.5W
- Sensor Type: NDIR
- Response Time (T90) : <10 seconds
- Output Signal: 4 to 20mA (min 250, max 500 ohm) / 0 to 10Vdc
- Calibration: Automatic Baseline Correction
- Control/Check: The detector should be tested at least once per year
- Sensor Lifetime: >15 year (replacement recommended every 10th year or when the unit no longer indicates any gas)
- Operating Temperature: -40 to 50°C
- Operating Humidity: 10 to 90 % Rh (non-condensing)
- Cable Gland: 1 x M16
- Dimensions (LxHxD): 80 x 82 x 56mm
- Part Number: 809-1216
