Filters
Close

Copeland Emerson iPro Pump Skid Controller

SKU: 818-9011

Download User Manual

 

Pump Skid Controller

The Pump Skid controller (P/N 818-9011) is a standalone controller designed to control two pumps of the Refrigeration option with a primary/secondary/backup control strategy using on-board I/O and control algorithms. The pumps push glycol refrigeration to the cases for cooling. The Pump Skid controller can also interact with a Variable Frequency Drive (VFD) to send a 0-10V control signal, as well as manage VFD faults, resets, and bypass. Only one pump can run at a time.

The Pump Skid controller can manage two pumps, with one pump as primary, and the other as secondary. Each pump will have one relay output per pump and one analog output per pump. The relay output(s) will direct the pump(s) ON or OFF based on certain criteria that must be met. The analog output(s) modulates accordingly in order to maintain a user-defined setpoint. The Pump Skid controller supports local physical inputs and outputs.

The Pump Skid Controller's I/O Points

The Pump Skid controller supports 4 analog inputs, 7 digital inputs, 2 analog outputs, and 7 relay outputs. The Pump Skid’s 7 relay outputs are rated at 2.0 amps max.

Independent System Control

The Pump Skid controller can control two pumps with a primary/secondary/backup control strategy independently, but is also designed to interface with an E2 controller. Networking the Pump Skid controller to a central controller also allows you to view status on E2 and UltraSite32 Site Manger status screens, report alarms, and log point values.

The Pump Skid controller configuration can be programmed through the E2 front panel.

Part Number: 818-9011